[PR]上記の広告は3ヶ月以上新規記事投稿のないブログに表示されています。新しい記事を書く事で広告が消えます。
Today I will show you the best LED grow lights of 2023. Grow lights are required for seeding or growing vegetables or flowers indoors. You can save a lot of money by owning cheap grow lights. For example, the initial cost of purchasing LED grow lights can be high, but you can save money in the long run by saving electricity (LED lights use much less electricity than other bulbs).
This is a great grow lighting system for gardeners new to seeding, indoor gardening and greenhouse gardening because first of all it’s so cheap you don’t have to worry about spending a lot of money on something you might not like or understand to get right it. So it won’t be yet another item that you have to stockpile or start figuring out how to get rid of it.
Grow lights should always be placed at least 2 feet away from plants at any stage of growth. Even LED bulbs can generate enough heat to dry out seedlings or even burn them.
As the plants grow, their leaves should always be kept out of direct contact with the grow lights so they don’t burn. Timing is everything with any type of grow light, so try to provide light that replicates your average summer light levels.
Grow lights should not be used as plant heaters, so try to focus on lighting, not heating.
ECO Farm ECOZ 510W Samsung 301H Chips LED Grow Light With Separately UV+IR Control
Features:
The ECO Farm grow light is Built with the best parts, Top Bing Samsung LM301H & Osam Chip and brand driver for higher efficacy and longer lifespan; to ensure high-efficiency PPE 2.75umol/J, better heat dissipation, and long service life. Compared with old plant lights, the average PPFD is increased by 30%, and the yield and quality are increased by 50%. With 6 LED growth lights, each rod is covered with high-grade glue, waterproof, and easy to clean, not easy to be filled with dust. This plant growth light also uses a special dimmer, which can precisely adjust the brightness. 0–10 levels are optional. This means that you can see clear brightness levels and record while adjusting. No need to worry about differences. Full-Cycle Sunlike Spectrum, close to natural sunlight. The spectrum applies to the entire stage of indoor planting.
ChilLED Tech Growcraft X3–500W LED Grow Light
Features:
ChilLED LED Grow Light will maximize your yields and profits. Switch from HPS to ChilLED and increase your yields & profits 30–70+% without adding any additional heat, energy costs or cooling requirements. The market-leading efficiency combined with the tunable Yield Max spectrum equals unmatched performance. This grow light uses the highest build & component quality — never sacrificed for profits. ChilLED grow lights are built to last. Retrofit into your environment with ease. Hands down, ChilLED lights are the most versatile on the market. Growcraft lights have very high light output and unless your plants are already acclimated to high light intensity, it is best to start slow with the light hanging high and possibly also dimmed. Then monitor plant reaction over a few days and slowly adjust as needed.
Slim 500S Dimmable LED Grow Lights 3500k
Features:
Slim500S aims to be the most powerful and efficient LED plant growth light ever, adding the 500 watts LED plant growth light category. The new Samsung version 2 LH351H Crimson LED with a rating of 3.75 umols/J and the new Samsung LH351H Royal Blue LED with Samsung’s white LM301H LED with a 2-way dimmable system running 2,082 LEDs can achieve next-generation efficiency and Tuning ability. Slim 500S is by far the most advanced LED plant growth light of its kind. The combination of Slim 500S and our main touch screen controller enables growers to reproduce nature with precise precision and provide strain-specific lighting.
Light is essential for plant growth. All plants, including flowering, fruiting and vegetable plants, are autotrophs that have evolved to use light to drive photosynthesis. Photosynthesis is the process plants use to convert water and carbon dioxide into complex carbohydrates (sugars) and oxygen. These carbohydrates, such as cellulose or glucose, provide the metabolic building blocks for various biosynthetic pathways. Excess carbohydrates are used for biomass formation, including stem elongation, leaf area increase, flowering, fruit formation, etc. The photoreceptor responsible for photosynthesis is chlorophyll, although other types of antennal photoreceptors (mainly carotenoids) also facilitate photosynthesis. In addition to driving photosynthesis, electromagnetic radiation of specific wavelengths is also used as a source of information to drive photomorphogenesis (changes in plant form caused by light), photoperiod (response to light-dark cycles) and phototropism (direction of growth) . Each type of photoreceptor is sensitive to specific wavelengths and drives a different subset of photomorphological changes.
Chlorophyll is the key photoreceptor in green plants and comes in two main forms, A and B. Chlorophyll A is the major plant pigment, accounting for approximately 75% of photosynthetic activity, with peak absorption responses at 430 nm and 680 nm. Chlorophyll B has absorption peaks at 460nm and 640nm and is an auxiliary pigment responsible for collecting energy and transferring it to chlorophyll A. Therefore, chlorophyll B is not independently involved in biosynthesis. In addition, the 3:1 ratio of chlorophyll A to B in plants indicates that plants are mainly dependent on chlorophyll A for photosynthesis. Although chlorophyll increases under electromagnetic radiation whose spectral composition is rich in red (long wavelengths) and blue (short wavelengths), chlorophyll reflects most wavelengths in the green region (550 nm to 650 nm), which is how leaves appear Green reasons.
The carotenoid family includes beta-carotene and the main xanthophylls (zeaxanthin, violaxanthin and lutein). These secondary metabolites absorb light most strongly in the 450 nm to 550 nm range. Carotenoids are yellow to orange because they reflect or transmit light in the wavelength spectrum around 550 to 650 nm. Carotenoids not only contribute to photosynthesis, but also protect chlorophyll from photooxidation by dissipating excess light as heat when the input energy to the photosynthetic region is overloaded.
Plants also have non-photoreceptor and non-photomorphogenic antennae, such as anthocyanins and flavonoids. They act as sunscreens and block superoxide production in response to high intensity blue (400–500nm) or ultraviolet (300–400nm) radiation. In plants, anthocyanins, flavonoids, and carotenoids are important bioactive antioxidants that suppress free radicals and eliminate compounds that cause photobleaching and growth inhibition.
Photomorphogenesis is mediated by phytochromes, cryptochromes, and phytochrome photoreceptors. Phytochromes have two isomers, called Pr and Pfr, which respond to 660 nm red and 735 nm infrared radiation, respectively. Different photomorphogenetic responses mediated by phytochromes are sent to metabolic pathways in plants to regulate seed germination, root development, tuber and bulb formation, leaf expansion, stem elongation, dormancy, flowering and fruit production. Cryptochrome, which absorbs light in the 340 nm to 520 nm range, prevents hypocotyl elongation and regulates the entrainment of circadian rhythms in flowering plants. Phototropins are plasma membrane-localized protein kinases that regulate phototropism, chloroplast accumulation, stomatal pore size, leaf flattening, and inhibition of leaf expansion.
There are a lot of things to consider when you determine your grow light’s lifespan. We hope that this article helps to simplify at least one of those factors for you!
The good news is that most LED grow lights are going to last a very long time. One more reason we think LEDs are the best choice for indoor growing.
If you have any tips or questions about how to determine your grow light’s lifespan, let me know in the comments! And as always, if you like what you read, share us with your friends!
Happy Growing!
¡Seamos sinceros! Las plantas necesitan luz. La pregunta es ¿cuánta luz necesitan? La respuesta depende del tipo de plantas que esté cultivando. En general, las plantas necesitan luz para producir energía a través de la fotosíntesis. Las plantas utilizan esta energía para realizar diversas funciones, incluido el crecimiento y la floración.
Muchos factores afectan la cantidad de luz que necesita una planta, pero uno de los más importantes es si su planta es una planta de interior o exterior. En general, las plantas de interior necesitan menos luz que las plantas de exterior porque están protegidas de elementos agresivos como el viento y la luz solar intensa. Sin embargo, algunas plantas de interior aún necesitan más luz que otras, especialmente si desea que se multipliquen y prosperen durante su ciclo de vida. Con esto en mente, este artículo tiene como objetivo arrojar luz sobre cómo elegir las mejores luces de cultivo para sus plantas de interior.
La iluminación LED de espectro completo tiene varios beneficios para las plantas.
En primer lugar, las luces de cultivo LED son muy eficientes. Utilizan menos electricidad y generan muy poco calor que otros tipos de luces de cultivo. Esto los hace ideales para el cultivo en interiores, donde la temperatura y la humedad deben controlarse cuidadosamente.
Las luces de cultivo LED también tienen una larga vida útil. Con el cuidado adecuado, pueden durar muchos años, lo que los convierte en una opción más rentable que otros tipos de luces de crecimiento a largo plazo.
Finalmente, las luces de cultivo LED brindan a las plantas la luz de espectro completo que necesitan para un crecimiento óptimo. Esto significa que las plantas que crecen bajo luces LED son más sanas y producen más frutas o flores que las plantas que crecen bajo otros tipos de luces.
ECO Farm ECOZ Pro 1000W Barras de Luz LED Cultivo con Chips Samsung 301H y UV+IR
Características:
La luz de cultivo LED ECO Farm ofrece a los cultivadores y jardineros de interior la capacidad de estimular la previsibilidad, aumentar los rendimientos y aumentar la calidad durante toda la temporada. La luz de crecimiento utiliza las mejores piezas, chips Top Bin Samsung LM301H y Os-ram, y controladores de marca, para lograr una mayor eficiencia y una vida útil más larga; La intensidad de la luz es mayor, la atenuación de la luz es menor y el lumen y el valor PAR son mejores que los LED ordinarios. Le permite obtener un rendimiento un 30% superior al HPS. El número de chips ECOZ PRO 1000W es 3480PCS.
ECO Farm ECOZ Lite 1000W Samsung LM281B Chips LED Grow Light Strip con control UV + IR separado
Características:
Estas luces de cultivo ECO Farm LED garantizan una iluminación concentrada y uniforme y reducen el desperdicio de luz. Esta luz para plantas brinda un aumento del 30 % en la producción, consume un total de 1000 W, 2800 LED y reemplaza la luz para plantas tradicional de 2000 W. ¡Obtenga mayores rendimientos mientras ahorra costos de energía! Las luces de crecimiento son fáciles de ensamblar en minutos. Puedes instalar tantas tiras de LED como quieras. Plug and play, ahorre efectivamente su costo y tiempo de instalación.
Características:
Esta luz de cultivo LED ECO Farm tiene un espectro completo que acelera la floración y la fructificación y ofrece una gran ayuda en todas las etapas del crecimiento de las plantas. Esta luz de cultivo interior es ampliamente adecuada para uso comercial, hogareño, tienda de cultivo, sala de cultivo, cultivo hidropónico, cultivo de ciclo completo en suelo. Es más rentable en comparación con otras luces de barra del mismo tipo. El panel posterior de aluminio logra una excelente disipación del calor.
Al elegir tiras de luces LED para el crecimiento de las plantas, hay algunas cosas a considerar.
Elija una luz LED que emita el color adecuado para sus plantas
Las luces LED azules, al igual que la luz natural, son excelentes para el crecimiento vegetativo, mientras que las luces LED blancas son excelentes para la floración y la fructificación.
El vataje correcto
Cuanto mayor sea la potencia, más brillante será la luz. La potencia determina la cantidad de energía que consume la luz. Cuanto mayor sea la potencia, más energía consume la luz.
El ángulo de haz correcto
El ángulo del haz es el ancho del haz de luz emitido por la luz LED. Un ángulo de haz más ancho esparcirá la luz sobre un área más grande, mientras que un ángulo de haz más estrecho enfocará la luz en un área más pequeña.
Una alta relación lm/W
Mide la cantidad de luz que emite la luz LED por vatio de potencia. Una mayor relación lm/W significa más luz y menos consumo de energía.
Lúmenes
Los lúmenes miden la cantidad de luz que se emite desde las tiras de luces LED de cultivo. Cuanto más altos son los lúmenes, más brillante es la luz.
Temperatura del color
La temperatura de color de un LED se mide en Kelvin (K). Cuanto menor sea el Kelvin, más cálida será la luz. Cuanto mayor sea el Kelvin, más fría será la luz.
Las luces de crecimiento son excelentes para imitar el sol y lograr que las plantas de interior realicen la fotosíntesis correctamente. No importa qué tipo de luces de cultivo elijas, querrás que contribuyan al calor alrededor de tus plantas y en tu habitación. Algunas plantas prosperarán con este calor, mientras que otras se marchitarán.
La clave es comprender las diversas necesidades de cada planta. De esta manera, puede brindarles la atención y el entorno adecuados que necesitan. El uso adecuado de las luces de crecimiento será una herramienta invaluable en el cultivo de plantas de interior.
If you’re starting your seedlings indoors, you’ll want to install some grow lights. Grow lights provide the artificial light that seedlings need to thrive. They come in all shapes, sizes and strengths. You can buy it from any online or physical store. But it is difficult to choose a suitable LED grow light. So, how to choose LED plant growth lights suitable for seedlings?
Well, in the next article, you will learn more about it. This article is beneficial even if you are a beginner.
Plants need light for photosynthesis, the process by which plants convert light energy into chemical energy that can be used for growth and reproduction.
During photosynthesis, plants use light energy to convert carbon dioxide and water into sugar. These sugars are then used by the plant for energy, to build new tissues or stored for later use.
When it comes to photosynthesis, not all light is created equal. Different colors of light have different energies and are used in different ways by plants.
Red and blue light are the most important colors for plant growth. Plants use red light for flowering and fruiting. Plants use blue light for vegetative growth.
Full-spectrum LED grow lights provide the full-spectrum light plants need for photosynthesis. These lights can be used to grow plants from seedlings to mature.
ECO Farm ECOZ 1000W Samsung 301H Chips LED Grow Light With Separately UV+IR Control
Features:
The ECO Farm grow light is equipped with Top Bing Samsung & Osram Chip and brand driver to ensure high-efficiency PPE 2.9umol/J, better heat dissipation, and long service life. Compared with old plant lights, the average PPFD is increased by 30 %, and the yield and quality are increased by 50%. At the same time, it also has the most trustworthy full Cycle Sunlike Spectrum, close to natural sunlight. The spectrum applies to the entire stage of indoor planting. This ECO Farm LED grow light has independent control of the VEG switch, Bloom switch, and UV switch. VEG dimmer controls white light 5000K, one Bloom dimming The device controls white light + red light (3000K+660nm+730nm), and the UV dimmer controls UV 395nm. And there are optional knobs and touch screen controllers.
Spectrum King Phoenix 1050W LED Grow Light
Features:
Spectrum King’s Phoenix 1050W LED Grow Light is a grow lighting beast that unleashes 1050 watts of sun-like light in areas up to 6' x 6', unleashing the ultimate output for your grows. Designed to hang high, the Phoenix 1050 recreates the sunniest summer days for plants that never seem to get enough light. SK Cryo-Therm cooling technology enables an ultra-thin profile that allows maximum airflow and minimizes microclimates. Optimized for single or multi-tier planting near the canopy. For growers who need the biggest, brightest LEDs, the Phoenix 1050W is for you.
Spider Farmer SE1000W Dimmable Full Spectrum CO2 LED Grow Light
Features:
Spider Farmer LED Grow Lights feature a uniquely designed extension of 10 to provide more even and complete canopy coverage, especially in exterior growing areas. With 3710 SAMSUNG LM301B diodes, the SE1000W Led Grow Light consumes 1000 watts at 2955 umol/s, achieving an impressive PPE of 2.9 umol/J, covering a high yield full cycle growth of 4'x4'. The dimmer knob is ideal for growers to adjust light intensity for different growth stages. The SE1000W grow light comes with a detachable driver and long power cord to reduce ambient heat in the grow space and extend its lifespan. The LED diodes are coated with water repellent, so there is no need to worry about wet environment.
Usually, artificial lighting for plant growth is used for about 14 hours on average. The rest of 10 hours is lights off. Plants need their rest to metabolize nutrients.
That’s the general rule but there can be exceptions because some plants might need more time under grow lights, while others might need less.
For example, hydroponic lettuce might be an exception to the lighting for 14 hours on average knowledge. Growers might leave the artificial lights on for 16 to 18 hours and only 6 to 8 hours off. Lettuce is definitely a long-day plant.
On the other hand, strawberries are short-day cycle plants that need longer periods of darkness. Short-day cycle plants should not be exposed to more than 12 hours of grow lights.
And there are also neutral plants, which are pretty much in the middle, between long-day and short-day plants. These can be mixed and grown together with either of the two categories.
In hydroponic systems, some choose to use a timer to set it up to their lights.
The placement of the grow lights is also important, you should pay attention to that, too.
In short, indoor grow lights are an easy way to add life and color to your home or office. Just choose the right one, and make sure you give your plants enough light to thrive. With so many different options, it’s hard to go wrong!
Not all fans are created equal, which is why it’s important to understand the different types of fans and their uses before buying fans for your grow room. There are several different types of fans commonly used in grow rooms, each with their own advantages and disadvantages.
In this blog post, we’ll discuss the most common types of fans and their common use in a growroom setting. So if you’re looking for a fan for your garden and you’re not sure where to start, read on!
Inline fans are a great way to improve air circulation in your grow room and avoid the problems mentioned above. An inline fan is a ventilation system that helps improve the air quality of your grow room by drawing in fresh air from the outside and expelling contaminated air to the outside.
An inline fan is simply a fan installed in a ductwork. This means they can push air through your ducts, which is essential for keeping your growing room temperature and humidity at the right level for optimal growth.
The grow room needs to be well ventilated to keep the plants healthy. Inline fans are a great way to achieve both goals. Inline ducted fans are available in a variety of sizes and can be powered by electric motors or belt drives.
Features:
This ECO Farm inline duct fan is used in indoor grow facilities and vertical farms, heating and cooling transfer, commercial drying and air filtration applications. Inline blowers can also create a negative pressure environment, simulate wind, exhaust odors and fumes, and draw in fresh air from outside. The blower provides an airflow rate of 2120 CFM using 550 watts at maximum speed. The fans don’t “purge” at lower speeds or waste power. The fans give you unique control flexibility without background noise or hum at low speeds. Coated steel housing prevents rust and protects the motor and blade from accidental damage and harsh elements to reduce maintenance in demanding applications.
Features:
Controlled by a 32-bit microprocessor, these powerful mixed-flow digital fans deliver outstanding performance and value. Available in 4", 6", 8" and 10" models, Jetfans is the ideal solution for your ventilation needs. Because the motors in these fans are EC (electronically controlled), they offer very high efficiency, reliability and controllability. They include a highly precise speed control unit that can be detached from the fan and power cord if desired. Low power consumption — Jetfans run only 25% of the power of comparable inline fans Their EC motors are efficient, reliable and responsive to speed control ETL certified
Can-Fan Max Fan Pro 6" Mixed Flow Inline Fan 420 CFM
Features:
The Max-Fan® Pro Series is even more efficient and stronger than the original Max-Fan® design. The Max-Fan® Pro Series has a much more robust housing due to the fiberglass reinforced plastic compounds that meet all of the UL and CSA requirements. The fans have three control speeds for true performance. These fans run quieter than the Max-Fan®. The fans come with the EZ Mount™ bracket for easy mounting.
There are various sizes of grow rooms, each requiring a different amount of airflow to ventilate them.
Exchanging stale air inside with fresh air from the outside of your grow space is vital for optimal plant growth. This figure is measured in CFM or cubic feet per minute. Therefore most devices sold should specifically state how many CFM they are designed to flow.
To find the amount of airflow needed for your grow space, first find its volume in cubic feet. Multiply its length by its width and height. This will equal your grow space’s volume, with the required airflow equal to this figure in cubic feet per minute, or CFM.
Adding components like ducting and carbon filters will reduce fan performance in your grow space which affects the fan size you need.
When it comes to ducting, the number and sharpness of its bends factor into the airflow resistance. This is because airflow reduces the further it must travel so the straighter the ducting route the better.
The sharper the bend, the harsher the efficiency reduction; a 30° bend cuts the amount of airflow by 20% while a 90° bend diminishes airflow by 60%! Smoothing out any wrinkles can also improve fan performance and airflow.
Keeping your growing environment cool enough to maximize growth and yield can be the biggest headache for growers. Of course, there are many things you can do, but they all take time, effort, and money.
You just need to consider it an essential part of indoor growing. Accept that you will have to buy fans, ducts, filters, and maybe an air conditioning unit. Ideally, you should also buy LED grow lights rather than outdated HPS or MH lights (we still recommend CMH, although we prefer good quality LEDs).
La jardinería interior nunca ha sido tan fácil. Las luces de cultivo de interior te permiten cultivar una amplia variedad de plantas en cualquier época del año y en cualquier clima. Estas luces de crecimiento están especialmente diseñadas para reemplazar la luz solar natural, estimular la fotosíntesis y proporcionar el espectro de color correcto donde las plantas pueden crecer y prosperar.
Las luces de crecimiento vienen en una amplia gama de potencias y, como puede suponer, cuanto mayor sea la potencia, más fuerte será la luz. Compare el vataje con la luz del sol, que es de aproximadamente 1370 vatios por metro cuadrado.
Elegir una luz de cultivo de 1370 W puede parecer una opción obvia, pero hay algunos factores muy específicos a considerar primero:
Distancia de la lámpara al cultivo
Cobertura de la bombilla (por metro cuadrado)
Nivel de luz ambiental actual
temperatura de la lámpara
requisitos de cultivo
Lo primero a considerar es la distancia. Si su luz tiene una cobertura de 1 metro cuadrado y se cuelga correctamente sobre el cultivo, puede parecer obvio usar una luz de 1370 vatios para replicar la luz solar directamente.
Sin embargo, a menos que sus plantas estén completamente a oscuras, habrá algo de luz ambiental disponible durante todo el día, lo que significa que una luz de 600 vatios puede ser suficiente.
Para cuartos oscuros orientados al sur, se recomienda una mayor potencia, pero no se requiere. Las luces de cultivo de alto voltaje son más cálidas que la luz del sol la mayoría de los días, por lo que no deben colocarse a menos de 1 m de la planta para evitar quemarla.
También hay consideraciones de seguridad, especialmente con las luces de cultivo halógenas más antiguas. Finalmente, considere los requerimientos de cada cultivo.
Si cultivas plantas a las que les gusta que sus cabezas estén al sol pero sus pies a la sombra, maíz dulce ligero, entonces 600w está perfectamente bien. Para las plantas de interior tropicales en las habitaciones orientadas al este, por lo general son más felices en un lugar ligeramente sombreado, pero necesitan 12 horas de luz indirecta por día.
Esto es difícil de hacer en cualquier lugar, excepto en una casa orientada al sur, por lo que agregar una bombilla de luz de techo de 300 vatios de bajo nivel a la habitación para encenderla por la noche les ayuda a tener el nivel de luz adecuado para extender las horas de luz.
ECO Farm SP Series 630W Luz LED Cultivo Regulable con Chips Samsung Barras de Luz Plegables
Características:
Esta luz de cultivo LED ECO Farm adopta 1632 diodos hortícolas SAMSUNG LM281B de alta eficacia, que proporcionan una salida de luz PPFD de hasta 1764umol/s, logrando una alta eficiencia energética de 2,8 umol/J, creando un nivel de luz ideal para cultivadores profesionales y comerciales. Perfecto para una cobertura vegetativa de 6'x6' y una cobertura de floración de 5'x5' Crecimiento horizontal y vertical.
ECO Farm Serie UI2 690W Barras de Luz LED Cultivo con Regulación de Tres Canales para Invernadero
Características:
Esta luz de cultivo LED ECO Farm está diseñada con 8 tiras para una cobertura de dosel más uniforme y completa. Equipado con diodo Samsung LM301B de alta eficiencia con resistencia térmica extremadamente baja. La luz de la planta no parpadea y es tenue, con una vida útil de 50.000 horas. La luz de cultivo LED consume 690 vatios a 2240 µmol/s y logra un PPE satisfactorio de 2,8 µmol/J que cubre un crecimiento de ciclo completo de alto rendimiento de 4'x4'.
Características:
Con un funcionamiento de sólo alrededor de 830W vatios con una salida de 2077 µmol s-1, este LED alcanza una eficiencia de 3,1 µmol s-1 por vatio. Maximiza tus rendimientos y ganancias con ECO Farm luces LED cultivo. Cambia de HPS a ECO Farm luz de cultivo y aumenta tus rendimientos y ganancias en un 30–70 +% sin agregar calor adicional, costos de energía o requisitos de enfriamiento. Los LED pueden ofrecer más luz utilizable por vatio que la iluminación de cultivo tradicional.
Digamos que su luz indica que viene con una vida útil de 50,000 horas y planea usarla desde la semilla hasta la cosecha. Para determinar lo que eso significa para usted, podemos usar un conjunto simple de ecuaciones.
Paso 1: determina cuántas horas al día planeas encender tu planta.
Tus plantas necesitarán un mínimo de 13 horas de luz diaria durante el ciclo vegetativo (la mayoría de los cultivadores experimentados eligen hacer 18 o 20 horas de “tiempo despierto” por día) y exactamente 12 horas de luz durante el ciclo de floración.
Para este ejemplo, digamos que las luces estarán encendidas durante 18 horas al día durante la etapa de crecimiento y 12 horas durante la etapa de floración.
Paso 2: determina cuánto tiempo estarás vegetando tus plantas.
Esto puede ser desde tan solo 45 días hasta 5 meses (o más) dependiendo de una variedad de factores.
Las plantas autoflorecientes generalmente vegetarán durante 4 a 6 semanas antes de cambiar automáticamente a la floración. Por otro lado, algunas personas utilizan el entrenamiento de bajo estrés (LST) u otros métodos que pueden prolongar la etapa vegetativa durante meses.
Si no está seguro de qué esperar, está bien ir con el promedio hasta que obtenga algunos cultivos en su haber. Por el bien de este ejemplo, usaremos un período de tiempo relativamente común para el ciclo vegetativo: 90 días.
Paso 3: calcula el número de horas vegetales que usarás por planta.
Este es un problema básico de multiplicación basado en la información anterior:
18 horas por día (multiplicado por) 90 días en la etapa vegetativa = 1620 horas vegetativas.
Paso 4: repite la fórmula para determinar cuántas horas florecerá cada planta.
Ya dimos el primer paso: sabemos que las plantas en flor deben tener 12 horas de luz y oscuridad cada día. Así que podemos pasar directamente al paso dos, que será un poco más difícil.
La cantidad de tiempo que tu planta florecerá depende de la cepa y el tipo de semilla. Este es otro ejemplo de un número que podrías tener que estimar hasta que tengas más experiencia con tus variedades y estilo de cultivo.
Las semillas autoflorecientes generalmente hacen el viaje de semilla a cosecha mucho más rápido, y solo florecerán durante 4 a 6 semanas antes de la cosecha. En el extremo largo del espectro, algunas plantas florecerán durante 3 meses.
Vamos a ir con otro número promedio por el bien de este ejemplo. Digamos 60 días.
12 horas por día (multiplicado por) 60 días en la etapa de flor = 720 horas de flor.
Paso 5: sume los totales y divídalos por las horas de vida útil de la luz.
Entendiendo que cada planta debe usar 1,620 horas de vegetación y 720 horas de floración, cada planta debe tomar aproximadamente 2,340 horas de la vida útil de su luz.
50 000 horas de vida útil (divididas por) 2340 horas por planta = 21 cultivos en total (redondeando hacia abajo)
Según estos cálculos, una luz de espectro completo, de semilla a cosecha, con la vida útil estándar de la industria, le durará poco más de 21 cultivos completos. Suponiendo que tu cultivo dure 5 o 6 meses, ¡puedes esperar que una lámpara de calidad dure casi una década!
Esta es una ecuación simple que puede usar para determinar la vida útil de su luz de crecimiento. ¡Simplemente sustituya nuestros números con los que se aplican a su luz!
Creo que ahora tienes una mejor comprensión de la luz artificial. La luz que debe elegir depende completamente de su espacio de cultivo, entorno de cultivo, especies de plantas, presupuesto, etc.
Personalmente, recomendaría cultivar plantas de interior con luz de cultivo LED. Porque, en comparación con las luces ocultas y las luces fluorescentes, el precio de este tipo de lámparas es bajo en este momento y no consume demasiada electricidad. A largo plazo, tales lámparas tienen costos operativos relativamente bajos.